The circuit board is faulty. Enter model number to search for the required part specific to your product.
Learn how with our fridge troubleshooting and repair guide.
Why is my refrigerator light not working. Change the bulb in the refrigerator if the light is not working. The refrigerator is level and doors are properly aligned If you do not have an extra light bulb for your fridge, simply check the bulb to see if it is bad by checking the filament.
It could one of the following parts. When the bulb is good but the light is still not working, unplug the fridge and check the light socket next. If your fridge has stopped but the light still works.
The most common reason for your fridge light not working is that the light bulb has burnt out. If that isn’t the problem; Similar to any other light bulb, the light bulb has a certain life span.
If the light goes on, you at least know the fridge is getting power. Should this occur, it will prevent the light from working. Make sure the refrigerator is plugged into a live receptacle that’s receiving power (plug in a working lamp or an outlet circuit tester).
Lowering the temperature in the refrigerator compartment isn’t a good test, because many refrigerators are chilled via vents from the freezer. Fan motor, door switch, thermostat, defrost timer, compressor, and possible gas leaking. If the light board is receiving sufficient voltage, but the refrigerator light will not work, replace the light board.
If the switch is not being engaged properly, it could cause the interior lights to remain off. If a refrigerator light isn't working first check the light bulb, socket, and door light switch. Also, the door switch may be faulty, which may require an expert.
The door switch location varies by model number, but in most refrigerators, it can be found either near the top or bottom of the door opening. Or, food packets blocking airflow. Make sure the terminals aren’t damaged or discolored.
The refrigerator has light but it is not cold. Why is the fridge not cooling? Will rv fridge run off battery?
6 answers adjust temperature setting on my kenmore elite refrigerator and freezer (digital) french door, bottom freezer. If your whirlpool refrigerator's led lights are not working, you may need to replace the bulb. To ensure proper door switch contact check the following:
Lights on digital panal keep going up and down, the fridge is not working. Not open circuit when released. Check that the switch is still working electrically, i.e.
If the light is not turning on when you open the refrigerator, try replacing the light bulb first to see if it solves the problem. Although this isn’t as common, a power cord on the refrigerator can become frayed or damaged, disrupting the flow of electricity. However, you need to check the following parts:
Owner's of similar model maytag and kenmore refrigerators have reported the exact same issue! It's possible that your appliance is fitted with a reed switch, and these can sometimes fail. First, ensure that the light board is receiving the proper amount of voltage.
Please check the conditions in following checking for procedure to improve about 'low cooling issue'. If replacing the thermocouple doesn't work, your pilot light problems might be because the pilot light's gas line has too much air in it. Turn down the freezer’s temperature setting to see if the fridge kicks on.
1 check its electrical power. A telltale sign is a dark spot on the bulb or a loose filament. If your fridge is not cooling though the light is on, here is what you should do.
If the light in your refrigerator is not working, obviously the first thing to do is remove the light and replace it with a new one. The circuit board can be found in the control panel on the front of your fridge. Unplug and turn off the refrigerator if the light bulb is still not working.
If the light bulb inside your refrigerator is not working, this might initially lead you to think that the appliance itself is no longer working when in actual fact it's simply the bulb that's gone. Because the external temperature will be virtually the same as the temperature inside your refrigerator. There are a few things you can try before calling a repairperson:
The problem (defective) led light module is on the fridge side, located at the top. 2 for the overhead lights in the fridge, it appears as though the 3 overhead light modules are. If the refrigerator’s light doesn’t work and its motor doesn’t run, here is the basic refrigerator troubleshooting you can do:
Check the following parts if your ge refrigerator light is not working: > 2 in the fridge side and 1 in the freezer. Sometimes, the problem could be as simple as not plugging the socket;
Locate the light inside the refrigerator, typically near the top, and remove the cover. 1 for the freezer light there is a light switch in the freezer that may have gone faulty.